
CanBus System

Wireless System

Analog System
Ship Cranes
Klug Avalon has defined a user-friendly safety system that is easy to install. The system provides audio visual indications with a motion cut-off feature which activates when the crane exceeds the load limit. The display is mounted in the cabin and sensors are connected to the display which converts the signal into digital signal and output shown on the display.
Specifications- Ship Crane Solution
– Load Sensor suitable for Marine Loading can withstand impact loading
– Suitable for Knuckle Boom or Straight Boom
– The Digital Display system, the operator can view the data.
– Small Length transducer
– Fail-safe operation and Motion Cut Off
Display: | Alphanumeric digital display 16*2” |
Sensors: | Dynamometer, A2B Switch, Angle Sensor, Wind speed sensor (Optional) |
Annunciation: | Audio Visual Warnings on the digital display for approach, overload, Motion cut off. No Lift Zone, Anti 2 Block |
Relay: | 2 no. Potential free relay |
Power Supply: | 24 VDC / 12 VDC |
Operating Temperature Range: | 0ºC to 60ºC |
Storage Temperature Range: | (-) 20º C to 80º C |
Accuracy of the System: | +/- 5 % |
IP Rating: | IP 65 ( For Display) |

Mobile
Connect

Data
Logger

IoT
Enabled

GPS
Tracking
Other Crane Safety Solutions

Offshore Crane

Backhoe Loader

Wheeled Excavators

Aerial Work Platform
View All Solutions
Hands-on
Training
Comprehensive Operator’s Training – where operators can practice with the equipment they will use each day. Worldwide we provide on site and in house training facilities, educating them about the safety of the cranes.

Check Schedule at Training Center

Schedule On-Site Training Session

On Demand Training Video
Product Information Video
Ship Crane Solution
Let’s Create a Safe
On-Site Environment
Together
Services
What is an SLI system?
Safe load indicator is a safety control unit mounted in the crane’s cabin to alert the operator if the lift is exceeding the safe operating range of the machinery
Is it necessary to install SLI system in our crane?
Yes, it’s necessary and important to avoid any future accidents while working with materials without knowing the actual load and rated crane capacity.
What if we have old crane dose your SLI system support our crane operation?
Yes off course, as per your crane capacity chart we will make a custom SLI system that matches your crane and its operation
We have pre-installed SLI system, still its need to update?
Yes, sometimes pre fitted safety system are inadequate to protect hence we recommend to talk our Crane safety system officer and know the best suited solution for your crane.
What is an anti-two block switch?
Over-hoist switch measures the distance between the lifting hook block & the head of the boom crane, which avoids the collision between them and alerts the operator by sending signals via the SLI.