Load Cell for Crane

Load Cell Sensor is used to measure the load of the suspended object on the crane hook. And passes the accurate digital value to the safe load indicator system to assure a safe working environment for the crane operator.

dynamometer-banner-icon (1)

Load Cell

Enquire For Product >

About Load Cell

At Klug Avalon Mechatronics Pvt Ltd, we own manufactures the Load cell to provide a highly reliable load cell sensor for the crane. Load cells are jointly mounted in the tensiometers & dynamometers, to provide accurate load measurement which then is passed to the safe load indicator in a digital value format. This measured value is helping to calculate with other sensor values as well to generate the final output for the crane operator whether the lifted load is safe as per the load chart or not.

At the time of primary installation, the LED Digital Display system is configured/set as per the load chart provided by the Machine manufacturer.

  • Load cells are used in tensiometer and dynamometer as a load sensing device
  • Majorly supply to equipment owners as well as OEMs
  • High accuracy and reliability
  • Easy to install and robust construction as it does not require special information to build.
  • Wide range of application in the construction crane industry
  • Load Cell for Telescopic Crane
  • Load Cell for Crawler Crane
  • Load Cell for Tower Crane
  • Load Cell for EOT/Gantry Crane (If equalizer pulley not available)
  • Load Cell for Offshore Crane
  • Load Cell for Level Luffing Crane

The Load Cell sensor is so accurate that measures the lifted load to assure the safe working condition for the crane/machine Operator, However in some cases when the lifted object load capacity exceeded the defined limit, then the control unit automatically lock the Crane/machinery until the operator hit the bypass buttons included in the SLI system control unit or until the Operator back to safe mode by adjusting one of the things (angle/ boom length/ load)

Following are the conditions when the cut-off situation activates the system and lock the machinery is:

  • Radius / Low boom angle
  • Weight Overload situation
  • A 2 B Limit Crossover signals
  • Radius / High boom angle
Bluetooth connect-Crane Safety System-Klug Avalon


Data Logger-Crane Safety System-Klug Avalon


Cloud Connect IOT -Crane Safety System-Klug Avalon


Crane gps tracking system-Klug Avalon


Similar Products

KOPS Display @ 150px X 150px

KOPS Display

Load Moment Indicator - LMI

Load Moment Indicator

Limit Switch - Over Hoist Switch - A2B Switch

A2B Switch

wind speed sensor for tower crane -global

Wind Speed Indicator

top up



Comprehensive Operator’s Training – where operators can practice with the equipment they will use each day. Worldwide we provide on site and in house training facilities, educating them about the safety of the cranes.
Training Schedule at Klug Avalon
Check Schedule at
Training Center
Schedule an Online Training at Klug Avalon
Schedule a
On-Site Training
On Demand Training Videos from Klug Avalon
On Demand
Training Video

Product Information Video

Load Cell | Load Sensor | For All Cranes

Connect to Our Crane Safety Expert

Download the Broucher!

Let's Create a Safe On-Site Environment Together

No matter you are a Crane Owner. A Crane Service Provider, or an Orignal Equipment Manufacturer(OEM), we have a solution for you all.
What is an SLI System?

Safe Load Indicator is a safety control unit mounted in the crane’s cabin to alert the operator if the lift is exceeding the safe operating range of the machinery

Is it Necessary to install SLI System in our Crane?

Yes, Its necessary and important to avoid any future accident while working with materials without knowing the actual load and rated crane capacity.

What if We Have Old Crane dose your SLI System Support our Crane operation?

Yes Off course, As per your Crane capacity chart we will make a custom SLI system that match your Crane and Its Operation

We have pre-installed SLI System, still its need to update?

Yes, sometime pre fitted safety System are inadequate to protect hence we recommend to talk our Crane safety system officer and know the best suited solution for your crane.

What is an Anti-two Block Switch?

Over-hoist Switch measures the distance between the lifting hook block & Head of the boom crane, which avoids the collision between them and alerts the operator by sending signals via the SLI.

Open chat
klug Avalon
Hello There!
How may I help you today?