Crane Anemometer

Wind Speed Indicator- Anemometer monitors the wind speed at the time, crane/machinery is working on a high altitude location. And passes the digital values to the operator to work in a safe working condition as per the Wind Sensor indication.

dynamometer-banner-icon (1)

Wind Speed Sensor

Type: 3 Cup anemometer
Max range up to: 30m/sec or 108km/hr
Cup construction: Stainless steel
Interface: Analog / CAN Open
Operating Temperature: -20 deg C to +70 deg C
Storage temperature: -30 deg C to +85 deg C
Protection Class: IP65

Enquire For Product >

About Wind Speed Sensor

The Klug Avalon Mechatronics Pvt Ltd manufactures a highly reliable Anemometer / Wind Speed Sensor for cranes working on high altitudes. As it’s advisable that not to work in a condition when the wind speed flow is exceeded the normal favorable safe to work speed. This Wind Sensor is mounted on the top of the crane’s boom head and monitors the flow of wind speed to protect the operator from any accidents due to heavy lift loads in risky wind speed situations

Note: At the time of primary installation, the Crane Anemometer is configured/set to the normal state.

  • Available in stainless steel cup which provides High environmental protection
  • Combined high accuracy & high response anemometer with wind vane
  • Elliptical cup design for wind dynamics
  • All-metal body and oversize ball bearings for long life
  • High durability and reliability in all weather conditions
  • Wind Speed Sensor for Telescopic Crane
  • Wind Speed Sensor for Crawler Crane
  • Wind Speed Sensor for Tower Crane
  • Wind Speed Sensor for Offshore Crane
  • Wind Speed Sensor for Level Luffing Crane

The length sensor is so accurate that measures the safe working condition for the Machine Operator, However, when the lifted object capacity is overloaded as per the boom then the SLI system automatically lock the Crane/machinery until the operator press the bypass button provided in the SLI system control unit or until the Operator back to safe mode by adjusting the situation (angle/ boom length/ load)

Following are the conditions when the cut-off situation activates the system and lock the machinery is:

  • Radius / Low boom angle
  • Weight Overload situation
  • A 2 B Limit Crossover signals
  • Min. radius / High boom angle
Bluetooth connect-Crane Safety System-Klug Avalon


Data Logger-Crane Safety System-Klug Avalon


Cloud Connect IOT -Crane Safety System-Klug Avalon


Crane gps tracking system-Klug Avalon


Similar Products

KOPS Display @ 150px X 150px

KOPS Display

Load Moment Indicator - LMI

Load Moment Indicator

Limit Switch - Over Hoist Switch - A2B Switch

A2B Switch

wind speed sensor for tower crane -global

Wind Speed Indicator

top up



Comprehensive Operator’s Training – where operators can practice with the equipment they will use each day. Worldwide we provide on site and in house training facilities, educating them about the safety of the cranes.
Training Schedule at Klug Avalon
Check Schedule at
Training Center
Schedule an Online Training at Klug Avalon
Schedule a
On-Site Training
On Demand Training Videos from Klug Avalon
On Demand
Training Video

Product Information Video

Wind Speed Indicator | For All Cranes

Connect to Our Crane Safety Expert

Download the Broucher!

Let's Create a Safe On-Site Environment Together

No matter you are a Crane Owner. A Crane Service Provider, or an Orignal Equipment Manufacturer(OEM), we have a solution for you all.
What is an SLI System?

Safe Load Indicator is a safety control unit mounted in the crane’s cabin to alert the operator if the lift is exceeding the safe operating range of the machinery

Is it Necessary to install SLI System in our Crane?

Yes, Its necessary and important to avoid any future accident while working with materials without knowing the actual load and rated crane capacity.

What if We Have Old Crane dose your SLI System Support our Crane operation?

Yes Off course, As per your Crane capacity chart we will make a custom SLI system that match your Crane and Its Operation

We have pre-installed SLI System, still its need to update?

Yes, sometime pre fitted safety System are inadequate to protect hence we recommend to talk our Crane safety system officer and know the best suited solution for your crane.

What is an Anti-two Block Switch?

Over-hoist Switch measures the distance between the lifting hook block & Head of the boom crane, which avoids the collision between them and alerts the operator by sending signals via the SLI.

Open chat
klug Avalon
Hello There!
How may I help you today?