Load Clamp Sensor
Load clamp is mounted on the top crane’s beam, it is used to measure the tension in the cable rope wire & protect the overload condition by passing the digital value to Big LED Display Scoreboard / SLI System, to assure the safe working environment for the crane operator.

Load Clamp Sensor
Enquire For Product >
About Load Clamp
At Klug Avalon Mechatronics Pvt Ltd, we own manufacture the integrated-customized, Load clamps as per the end-user requirements, to provide highly reliable load clamp sensor for the crane. The Load clamp sensor is mounted to the top beam flanges & it’s designed to assist when positioning heavy load-bearing lifting equipment to the lower flange which then passes the accurate digital value to a large scoreboard/Big LED Display and hence its reduces the risk of accidents while lifting a heavy object.
Note: At the time of primary installation, the Load clamps Sensor is configured/set as per the load chart provided by the machine manufacturer.
- Majorly supply to equipment owners and OEMs
- High accuracy and reliability
- Easy to install and robust
- Construction does not require special information to build.
- Wide range of application in the construction crane industry
- Load clamp sensor for EOT Cranes
- Load clamp sensor for Gantry Cranes
The Load Clamp Sensor is so accurate that measures the tension in the rope of a lifted object to assure the safe working condition for the crane/machine Operator, In some cases when the lifted object load capacity exceeded the defined limit and tension in the rope seems to be risky, then the control unit automatically locks the Crane/Machinery, until the operator press the bypass button as, is present in the SLI system control unit and/or until the Operator back to safe mode by adjusting one of the things (angle/ boom length/ load)
Following are the conditions when the cut-off situation activates the system and lock the machinery is:
- Radius / Low boom angle
- Weight Overload situation
- A 2 B Limit Crossover signals
- Radius / High boom angle

Mobile
Connect

Data
Logger

IoT
Enabled

GPS
Tracking
Similar Products

KOPS Display

Load Moment Indicator

A2B Switch

Wind Speed Indicator
Hands-on
Training

Training Center

On-Site Training
Session

Training Video
Product Information Video
Load Clamp Sensor | Load Sensor | For All Cranes
Connect to Our Crane Safety Expert
Download the Broucher!

Let's Create a Safe On-Site Environment Together
What is an SLI System?
Safe Load Indicator is a safety control unit mounted in the crane’s cabin to alert the operator if the lift is exceeding the safe operating range of the machinery
Is it Necessary to install SLI System in our Crane?
Yes, Its necessary and important to avoid any future accident while working with materials without knowing the actual load and rated crane capacity.
What if We Have Old Crane dose your SLI System Support our Crane operation?
Yes Off course, As per your Crane capacity chart we will make a custom SLI system that match your Crane and Its Operation
We have pre-installed SLI System, still its need to update?
Yes, sometime pre fitted safety System are inadequate to protect hence we recommend to talk our Crane safety system officer and know the best suited solution for your crane.
What is an Anti-two Block Switch?
Over-hoist Switch measures the distance between the lifting hook block & Head of the boom crane, which avoids the collision between them and alerts the operator by sending signals via the SLI.