Pressure Sensor
Pressure Sensors are used to measure the pressured oil in the hydraulic cranes, also known as pressure Transducers, use to sends the measured oil pressure digital value to the Load moment indicator for various safety calculation of lifted objects.
Pressure Sensor
| Pressure sensor: | 0-400 Bar |
| Sensor Type: | Strain Gauge |
| Supply Voltage: | 8- 32VDC |
| Output: | 4- 20 mA |
| Temperature range: | 40 deg C to 120 deg C |
Enquire For Product >
About Pressure Sensor
The Klug Avalon Mechatronics Pvt Ltd manufactures the hydraulic pressure / Transducers for hydraulic cranes/ forklifts & Industrial Cranes. At the time of suspended object moves from one place to another, the crane must be aware of lifted load capacity, hydraulic pressure sensor measure the running oil pressure and passes the digital value to the load moment indicator control unit
- High accuracy
- High Proof Pressures
- Exceptional Long Term Stability
- High Proof Pressures with All
- Stainless Steel Wetted Parts
- Measure the lift cylinder pressure
- Measure the outrigger cylinder pressure
The LMI Control unit received the signals from Pressure Sensor based on that the LMI assure safe working conditions for Operator, However, when lifting capacity is reached the defined limit as overloading or risk full Pressure caught in the bar, then the System just automatically locks the Crane/machinery until the operator press the bypass button available the control unit or until the operator back to safe mode by adjusting the situation (angle/boom length/ load)
Following are the conditions when the cut-off situation activates the system and lock the machinery is:
- Radius / Low boom angle
- Weight Overload situation
- A 2 B Limit Crossover signals
- Radius / High boom angle
Mobile
Connect
Data
Logger
IoT
Enabled
GPSÂ
Tracking
Similar Products
KOPS Display
Load Moment Indicator
A2B Switch
Wind Speed Indicator
Hands-on
Training
Training Center
On-Site Training
Session
Training Video
Product Information Video
Pressure Sensor | Load Sensor | For All Cranes
Connect to Our Crane Safety Expert
Download the Broucher!
Let's Create a Safe On-Site Environment Together
What is an SLI System?
Safe Load Indicator is a safety control unit mounted in the crane’s cabin to alert the operator if the lift is exceeding the safe operating range of the machinery
Is it Necessary to install SLI System in our Crane?
Yes, Its necessary and important to avoid any future accident while working with materials without knowing the actual load and rated crane capacity.
What if We Have Old Crane dose your SLI System Support our Crane operation?
Yes Off course, As per your Crane capacity chart we will make a custom SLI system that match your Crane and Its Operation
We have pre-installed SLI System, still its need to update?
Yes, sometime pre fitted safety System are inadequate to protect hence we recommend to talk our Crane safety system officer and know the best suited solution for your crane.
What is an Anti-two Block Switch?
Over-hoist Switch measures the distance between the lifting hook block & Head of the boom crane, which avoids the collision between them and alerts the operator by sending signals via the SLI.