Load Cell for Crane
Load Cell Sensor is used to measure the load of the suspended object on the crane hook. And passes the accurate digital value to the safe load indicator system to assure a safe working environment for the crane operator.
Load Cell
Enquire For Product >
About Load Cell
At Klug Avalon Mechatronics Pvt Ltd, we own manufactures the Load cell to provide a highly reliable load cell sensor for the crane. Load cells are jointly mounted in the tensiometers & dynamometers, to provide accurate load measurement which then is passed to the safe load indicator in a digital value format. This measured value is helping to calculate with other sensor values as well to generate the final output for the crane operator whether the lifted load is safe as per the load chart or not.
At the time of primary installation, the LED Digital Display system is configured/set as per the load chart provided by the Machine manufacturer.
- Load cells are used in tensiometer and dynamometer as a load sensing device
- Majorly supply to equipment owners as well as OEMs
- High accuracy and reliability
- Easy to install and robust construction as it does not require special information to build.
- Wide range of application in the construction crane industry
- Load Cell for Telescopic Crane
- Load Cell for Crawler Crane
- Load Cell for Tower Crane
- Load Cell for EOT/Gantry Crane (If equalizer pulley not available)
- Load Cell for Offshore Crane
- Load Cell for Level Luffing Crane
The Load Cell sensor is so accurate that measures the lifted load to assure the safe working condition for the crane/machine Operator, However in some cases when the lifted object load capacity exceeded the defined limit, then the control unit automatically lock the Crane/machinery until the operator hit the bypass buttons included in the SLI system control unit or until the Operator back to safe mode by adjusting one of the things (angle/ boom length/ load)
Following are the conditions when the cut-off situation activates the system and lock the machinery is:
- Radius / Low boom angle
- Weight Overload situation
- A 2 B Limit Crossover signals
- Radius / High boom angle
Mobile
Connect
Data
Logger
IoT
Enabled
GPSÂ
Tracking
Similar Products
KOPS Display
Load Moment Indicator
A2B Switch
Wind Speed Indicator
Hands-on
Training
Training Center
On-Site Training
Session
Training Video
Product Information Video
Load Cell | Load Sensor | For All Cranes
Connect to Our Crane Safety Expert
Download the Broucher!
Let's Create a Safe On-Site Environment Together
What is an SLI System?
Safe Load Indicator is a safety control unit mounted in the crane’s cabin to alert the operator if the lift is exceeding the safe operating range of the machinery
Is it Necessary to install SLI System in our Crane?
Yes, Its necessary and important to avoid any future accident while working with materials without knowing the actual load and rated crane capacity.
What if We Have Old Crane dose your SLI System Support our Crane operation?
Yes Off course, As per your Crane capacity chart we will make a custom SLI system that match your Crane and Its Operation
We have pre-installed SLI System, still its need to update?
Yes, sometime pre fitted safety System are inadequate to protect hence we recommend to talk our Crane safety system officer and know the best suited solution for your crane.
What is an Anti-two Block Switch?
Over-hoist Switch measures the distance between the lifting hook block & Head of the boom crane, which avoids the collision between them and alerts the operator by sending signals via the SLI.