Crane canbus Safety System-Klug Avalon

CanBus System

wireless crane controller-Crane System -Klug Avalon

Wireless System

Crane Safety analog System enabled-Klug Avalon

Analog System

Pick & Carry Cranes

Pick & Carry cranes – The new generation and the Hydra series are majorly prone to accident primarily because their operations are more complex. They move with the load, carry out loading using multiple hooks of variable capacity, have articulation function; all these leading to rapid stability lose during operation and often toppling of the crane.

Understanding these complexities, Klug Avalon offers a SLI system specifically designed for these cranes. We have a wide spectrum of customers who exclusively install our SLI systems on their cranes, OEMs, construction and Fleet operations are some of the domain to name a few. These SLI systems have gained market trust, helping Klug Avalon to manufacture and install over 3000 systems annually on these cranes.

Klug Avalon measures the pressure in the luff cylinder to measure the load lifted on any of the crane hooks. Unlike the unpopular sensor- Dynamometer, which is welded on the boom to measure the load; the pressure measurement technology is far superior, more accurate and maintenance-free.

Specifications- Pick & Carry Crane Solution

– No need of dead weights for load Calibration

– Easy to use, operator-friendly & trouble free operation

– Sunlight readable backlit LCD Display, UV stabilized with antiglare coating

– Clear & easy to understand Audio & Visual Annunciation for exceptional conditions

– Simple wiring using waterproof connectors

– Provision for implementing motion cut-off by incorporating Dump Valve in the hydraulic line

– Provision for Over Articulation Sensor and auto de-rating of crane capacity

– Robust Build, all components designed to operate in rough & rugged conditions.

Display:Alphanumeric digital display 16*2
Sensors:Pressure sensor, Length cum Angle sensor, A2B switch
Relay:1 no. Potential free relay
Power Supply24 VDC / 12 VDC
Operating Temperature Range:0ºC to 60ºC
Storage Temperature Range:(-) 20º C to 80º C
Accuracy of the System:+/- 5 %
IP Rating :IP 65 (for Display)
top up
Bluetooth connect-Crane Safety System-Klug Avalon


Data Logger-Crane Safety System-Klug Avalon


Cloud Connect IOT -Crane Safety System-Klug Avalon


Crane gps tracking system-Klug Avalon


Solutions – Casestudy

Other Crane Safety Solutions

Telescopic Crane Safety Solutions-Klug Avalon

Telescopic Crane

Lattice Boom Crawler Crane Safety Solutions-Klug Avalon

Lattice Boom Crane

Tower Crane Safety Solutions-Klug Avalon

Tower Crane

Lorry Loaders Crane Safety Solutions-Klug Avalon

Truck Mounted Crane

View All Solutions



Comprehensive Operator’s Training – where operators can practice with the equipment they will use each day. Worldwide we provide on site and in house training facilities, educating them about the safety of the cranes.

Training Schedule at Klug Avalon

Check Schedule at Training Center

Schedule an Online Training at Klug Avalon

Schedule On-Site Training Session

On Demand Training Videos from Klug Avalon

On Demand Training Video

Product Information Video

Pick & Carry Crane Solution

Let’s Create a Safe
On-Site Environment

No matter you are a Crane Owner. A Crane Service Provider, or an Orignal Equipment Manufacturer(OEM), we have a solution for you all.


What is an SLI system?

Safe load indicator is a safety control unit mounted in the crane’s cabin to alert the operator if the lift is exceeding the safe operating range of the machinery

Is it necessary to install SLI system in our crane?

Yes, it’s necessary and important to avoid any future accidents while working with materials without knowing the actual load and rated crane capacity.

What if we have old crane dose your SLI system support our crane operation?

Yes off course, as per your crane capacity chart we will make a custom SLI system that matches your crane and its operation

We have pre-installed SLI system, still its need to update?

Yes, sometimes pre fitted safety system are inadequate to protect hence we recommend to talk our Crane safety system officer and know the best suited solution for your crane.

What is an anti-two block switch?

Over-hoist switch measures the distance between the lifting hook block & the head of the boom crane, which avoids the collision between them and alerts the operator by sending signals via the SLI.

Open chat
klug Avalon
Hello There!
How may I help you today?