Load Plate for Crane
Load plat is used to measure line pull when installed either hoist line or luff line between wire rope and a dead end. Thus passes the digital value to the safe load indicator system to assured a safe working environment for the crane operator.
|Capacity:||As per customer requirement|
|Output:||Analog Output/ CAN|
|Supply Voltage Max:||12 Vdc|
|Protection Class:||IP 65|
|Strain gauge technology|
About Load Plate
Klug Avalon Mechatronics Pvt Ltd offers an in-house manufactured Load Plate to measure the line pull when installed either hoist line or luff line between wire rope and a dead end. This Load Plat also is known as Load Cell & is highly reliable for crane safety. The load plate is jointly mounted between the wire rope & the dead end, to provide accurate load measurement which then is passed to the safe load indicator control unit system in the form of digital value. This measured value is helping to generate the final output for the crane operator whether the lifted load is safe as per the load chart or not.
Note: At the time of primary installation, the LED Digital Display system is configured / set as per the load chart provided by Machine manufacturer.
- Majorly supply to equipment owners and OEMs
- High accuracy and reliability
- Easy to install and robust construction as it does not require special information to build.
- Wide range of application in the construction crane industry
- Load Plate for Telescopic Crane
- Load Plate for Crawler Crane
- Load Plate for Tower Crane
- Load Plate for EOT/Gantry Crane (If equalizer pulley not available)
- Load Plate for Offshore Crane
- Load Plate for Level Luffing Crane
The Load Cell / Load Plate sensor is so accurate that measures the lifted load to assure the safe working condition for the crane Operator, However, if lifted object load capacity exceeded the defined limit, then the control unit automatically lock the Crane until the operator press the bypass button is included in the SLI system control unit or until the Operator back to safe mode by adjusting one of the things (angle/ boom length/ load)
Following are the conditions when the cut-off situation activates the system and lock the machinery is:
- radius / Low boom angle
- Weight Overload situation
- A 2 B Limit Crossover signals
- radius / High boom angle
Product Information Video
Load Plate | Load Sensor | For All Cranes
Load Moment Indicator
Wind Speed Indicator
Let's Create a Safe On-Site Environment Together
What is an SLI System?
Safe Load Indicator is a safety control unit mounted in the crane’s cabin to alert the operator if the lift is exceeding the safe operating range of the machinery
Is it Necessary to install SLI System in our Crane?
Yes, Its necessary and important to avoid any future accident while working with materials without knowing the actual load and rated crane capacity.
What if We Have Old Crane dose your SLI System Support our Crane operation?
Yes Off course, As per your Crane capacity chart we will make a custom SLI system that match your Crane and Its Operation
We have pre-installed SLI System, still its need to update?
Yes, sometime pre fitted safety System are inadequate to protect hence we recommend to talk our Crane safety system officer and know the best suited solution for your crane.
What is an Anti-two Block Switch?
Over-hoist Switch measures the distance between the lifting hook block & Head of the boom crane, which avoids the collision between them and alerts the operator by sending signals via the SLI.
Connect to our
Crane Safety Experts
Klug Avalon Mechatronics Pvt. Ltd.
Plot No.4 & 7: Lane no. 4B, 105-106 Ramtekdi Industrial Area, Hadapsar, Pune, Maharashtra, India Pin: 411013.
Crane Safety Solutions
View All Solutions