KOPS Display

KOPS Display is a safety control unit mounted in the crane’s cabin to alert the operator if the lift is exceeding the safe operating range of the machinery.

dynamometer-banner-icon (1)

KOPS Display

Digital Display: AlphaNumeric 16×2” Display
Audio-Visual Indication: 80 db at 1 meter
Analog Inputs: Up to eight, taken as current or voltage input
Digital inputs: Up to eight, monitoring on or off state
Motion cut-off output: Three independent potentials free relay- upgradable to 8 nos.
Working Voltage: 240v AC/110v AC/ 24v DC/ 12v DC
Operating Temperature range: 0 deg C to 60 deg C
Storage Temperature range: 20 deg C to 80 deg C

Enquire For Product >

top up

About KOPS Display

The Klug Avalon Mechatronics Pvt Ltd offers a reliable Safe Load Indicator Solution for measuring crane lifting capacity and makes the lifting operation smooth, risk-free & safe for the Crane and Crane Operator. This Crane Monitoring system is mounted in the cabin for easy to use by the crane operator. A tough control system body comes with a 16X2’’ alphanumeric display to guide the operator for various crane operation and voice alerts when Lifted object capacity crosses the crane rated capacity.

At the time of primary installation, the Safe Load Indicator System is configured as per the Load Chart provided by Crane manufacturer. And thus receives the signals to be displayed on the KOPS Display Control Unit.

The smart Digital Safe Load Indicator Display comes with the following indication:

  • Duty Section: Shows the Currently operating Duty boom hook no.
  • Angle Section: Shows the working Angle between base and boom.
  • Radius Section: Shows the length between the boom head and base.
  • Length Section: Shows the Total Length between Boom head & Base
  • Load Section: Shows the Lifted Load of the Crane.
  • SWL Section: Show the Final Capacity to be lifted during the Operation.
  • %SWL Section: Show the Safe & Risky work Load Situation via Green, Yellow and Red LED light
  • Over articulate Signal:
  • NLZ Signal:
  • A2B Signal:
  • Error Signal:
  • Power Signal:

The KOPS Display control system Comes with supportive switch buttons for the following activities:

  • Falls Duty Button:
  • ESC Button:
  • Audio Button:
  • TARE On Button:
  • Enter Button:
  • Bypass Button:

The SLI Control unit is so perfect that measures the safe working condition for Operator, However, when lifting capacity is reached the defined limit, then the System automatically locks the Crane/machinery until the operator press the bypass button provided in the KOPS system control unit or until the Operator back to safe mode by adjusting the situation (angle/boom length/ load)

Following are the conditions when the cut-off situation activates the system and lock the machinery is:

  • Radius / Low boom angle
  • Weight Overload situation
  • A 2 B Limit Crossover signals
  • Radius / High boom angle
Bluetooth connect-Crane Safety System-Klug Avalon

Mobile
Connect

Data Logger-Crane Safety System-Klug Avalon

Data
Logger

Cloud Connect IOT -Crane Safety System-Klug Avalon

IoT
Enabled

Crane gps tracking system-Klug Avalon

GPS 
Tracking

Similar Products

KOPS Display @ 150px X 150px

KOPS Display

Load Moment Indicator - LMI

Load Moment Indicator

Limit Switch - Over Hoist Switch - A2B Switch

A2B Switch

wind speed sensor for tower crane -global

Wind Speed Indicator

Hands-on

Training

Comprehensive Operator’s Training – where operators can practice with the equipment they will use each day. Worldwide we provide on site and in house training facilities, educating them about the safety of the cranes.
Training Schedule at Klug Avalon
Check Schedule at
Training Center
Schedule an Online Training at Klug Avalon
Schedule a
On-Site Training
Session
On Demand Training Videos from Klug Avalon
On Demand
Training Video

Product Information Video

KOPS Display | HMI | For All Cranes

Connect to Our Crane Safety Expert

Download the Broucher!

Let's Create a Safe On-Site Environment Together

No matter you are a Crane Owner. A Crane Service Provider, or an Orignal Equipment Manufacturer(OEM), we have a solution for you all.
What is an SLI System?

Safe Load Indicator is a safety control unit mounted in the crane’s cabin to alert the operator if the lift is exceeding the safe operating range of the machinery

Is it Necessary to install SLI System in our Crane?

Yes, Its necessary and important to avoid any future accident while working with materials without knowing the actual load and rated crane capacity.

What if We Have Old Crane dose your SLI System Support our Crane operation?

Yes Off course, As per your Crane capacity chart we will make a custom SLI system that match your Crane and Its Operation

We have pre-installed SLI System, still its need to update?

Yes, sometime pre fitted safety System are inadequate to protect hence we recommend to talk our Crane safety system officer and know the best suited solution for your crane.

What is an Anti-two Block Switch?

Over-hoist Switch measures the distance between the lifting hook block & Head of the boom crane, which avoids the collision between them and alerts the operator by sending signals via the SLI.

Open chat
1
klug Avalon
Hello There!
How may I help you today?